Wine Storage began in the underground caves
of Europe. These caves provided the consistent storing conditions
that allowed wine to age at an elegant pace. By convention, these
conditions have become the standard for modern wine cellars: 55-58
degrees and 55-65% relative humidity.
Our wine cellar refrigeration
systems maintain these ideal conditions, gracefully aging your wines, then
keeping them at their peak for years to come.
EXTREMES - Nothing is more detrimental to your
wine than extreme heat or cold.
DAILY CHANGES- As the temperature rises,
your bottle of wine expands; but, the wine expands up to
seven times more than the glass bottle. This process creates pressure,
which forces wine out of the bottle. When the bottle cools a vacuum forms,
which sucks oxygen rich air into the bottle. Ullage is the oxygen
free air within the bottle. Unregulated, rapid temperature fluctuations
prematurely age and deteriorate your wine.
HUMIDITY - 55-65% is the ideal humidity
range for stable wine aging. Humidity levels of 80% or higher will
cause mold to form and rot the labels. Lower levels will increase
the amount of ullage forming in the bottle and will dry-out the glue beneath
the label.
WINE BREATHES- Wine breathes through the cork and
ages in the process. Environmental changes (fluctuations in temperature
and humidity) accelerate the aging process. Excessive oxidation causes
the wine to become bitter, as it would in a glass overnight. Wine
requires oxidation to mature; but, it must be regulated to assure adverse
conditions do not affect the aging of your wine. The pace of breathing
is faster at higher temperatures and slower at lower temperatures.
B. Split Refrigeration
-
Size determined by doing a heatloss calculation.
- Same basic
principals as above except that the evaporator and condenser are split.
- The evaporator
coil is physically in the room, while the condenser is usually placed outside or in another
conditioned room
- This system
requires a permanent drain.
- The only
thing needed between the two units is copper tubing for the liquid line
and suction line (specs contingent on sizing).
C. Air
Handler Systems
-
Size determined by doing a heatloss calculation.
-
Same basic principals as above except that this system is completely ducted.
-
Similar in principal to central air conditioning.
-
Has the capability of being able to physically control the humidity by
adding a humidifier and a dehumidifier.
-
Also has the ability to add a temperature/humidity alarm.
-
Duct sizing and number of ducts depends on size of unit, and the "throw
feet" rating of the grills used.
D. WCI Self
Contained Unit
-
Air Handler and indoor condenser all in one package.
-
Supply and return air is ducted to and from machine.
-
Drain for excess condensation needed.
-
Has the ability to add humidification and dehumidification.
The cool temperature and consistent humidity,
that our systems maintain, keep your wines at their peak. These proper
conditions will allow you to enjoy them for years to come. Please
"click" on the links below to find out more about each refrigeration system.
|
Split Air Systems
Starting at 1500 BTU's, the Split Air System is the ultimate in refrigeration for wine cellars. Unlike other
systems, the Split Air condenser is located outside the wine cellar. Standard split refrigeration units are designed to remove excessive humidity
but they cannot introduce humidity
The split air system is the recommended unit for high temperature environments. In many cases where there is a great temperature differential during the daytime hours, the split air system is the only way to go. We recommend you seriously consider this option and install an outside condenser. These systems usually work for 15 YEARS instead of 3-5 years for most regular systems. Obviously, there has to be a reason.
BREEZAIRE SPLIT AIR SYSTEMS
For Breezaire Split System technical specs click below (must have adobe acrobat plugin to view)BREEZAIRE SPLIT AIR SYSTEMS (click here for technical specs)
| Model |
Running Amps |
Weight |
Cubic Space |
Price |
Shipping |
| B2200 |
Evap. 1 Amp
Cond. 4 Amp |
92 |
265 cu. ft. |
$1339.00
 |
$169 |
| B4000 |
Evap. 1.5 Amp
Cond. 7.5 Amp |
105 |
1000 cu. ft. |
$1839.00
|
$179 |
WHISPERKOOL SPLIT AIR SYSTEMS
| Model |
Running Amps |
Weight |
Cubic Space |
Price |
Shipping |
| WKS-4000 |
Evap. 1 Amp
(17-1/2"Wx23-1/2"Hx16"D)
Cond. 10 Amp
(13-1/2"Wx18-1/2"Hx12"D) |
116 |
1000 cu. ft. |
$2850.00
|
$239 |
| WKS-7000 |
Evap. 1.5 Amp
(17-1/5"Wx23-1/2"Hx16"D)
Cond. 9.0 Amp
(13-1/2"Wx18-1/2"Hx12"D) |
126 |
1750 cu. ft. |
$3375.00
|
$239 |
All Whisperkool split systems come with the PDT Bottle Probe upgrade at no extra charge, Bronze finish, and a block heater for cold weather applications.
Exterior Condensor Package (comes with electrical weatherproofing kit)
$578
For Whisperkool Split System technical specs click below (must have adobe acrobat plugin to view)
WHISPERKOOL SPLIT AIR SYSTEMS (click for technical specs)
CELLAR MATE SPLIT AIR SYSTEMS
In my opinion, the "Rolls Royce" of dependable cooling systems produced. If you want the best made ...THIS IS IT!!
Slimline Evaporator Upgrade
Available Outdoor Condenser Upgrade
**Standard system includes an interior ceiling mounted commercial evaporator which sounds like an air conditioner on high, an indoor compressor, and a Honeywell electro-magnetic thermostat.***
Upgraded slimline evaporators and rugged louvered outdoor condensers are a recommended upgrade option.
For technical specs click below (must have adobe acrobat plugin to view)
SPLIT AIR SYSTEMS (click here for technical specs)
For technical specs on SLJ Evaporators click here (must have adobe acrobat plugin to view)SLJ Series Evaporators
| Model & BTU's |
Running Amps/Voltage |
Weight |
Cubic Space |
Price |
Shipping |
| CM2600 |
15 Amp/110V |
92 |
400-600 cu. ft. |
$2975.00
|
$195 |
| CM4010 |
15 Amp/110V |
105 |
750-1000 cu. ft. |
$3275.00
|
$215 |
| CM5700 |
15 Amp/220V |
92 |
1000-1500 cu. ft. |
$3475.00
|
$235 |
| CM7600 |
15 Amp/220V |
105 |
1500-2100 cu. ft. |
$3975.00
|
$255 |
| CM10,200 |
15 Amp/220V |
115 |
2000-2800 cu. ft. |
$4489.00
|
$285 |
| CM13,400 |
15 Amp/220V |
145 |
2800-3600 cu. ft. |
$5189.00
|
$305 |
| CM18,100 |
25 Amp/220V |
155 |
3500-4500 cu. ft. |
$5989.00
|
$325 |
| CM20600 |
30 Amp/220V |
165 |
4400-5500 cu. ft. |
$6989.00
|
$345 |
Suggested Available Upgrades
SLK Slimline Evaporator for 2600 - 5700 BTU'S (state of the art, attractive
& Q-U-I-E-T,includes ETC electronic thermostat,
please specify outside wall mount or inside wall ) $779.00
Slimline SLJ Evaporator for 7600 - 20600 BTU'S w/ ETC Electronic Thermostat (state of the art attractive
& Q-U-I-E-T, Wall Mount Unit for 7600 & higher) $979.00
Outdoor Louvered Condenser Package 2600 - 7600 BTU'S
(heavy duty gauge rust proof aluminum 18"W x 14"H x 26"D $679.00
Outdoor Louvered Condenser Package 8000 - 20600 BTU'S
(heavy duty gauge rust proof aluminum w/ raised base
& easy access fold up split housing) $1179.00
Add-on Ducted Split Systems(4010-7600 only) $899.00
Add-on Ducted Split Systems(10200-18100 only) $649.00
Aprilaire Humidifier $590.00
Winesmart Temp/Humidity Controller System $2079.00
For additional split air options click below
Cellar Mate Split Air Options(click here for options)
CELLAR MATE SELF CONTAINED AIR HANDLERS
The Cellar Mate climate control system is mounted near the wine cellar and supplies cool air through duct work requiring only air supply and return grills in the wine cellar. All Cellar Mate Climate Controlled Systems carry a full 1 year parts warranty. An extended 5 year warranty is also available for purchase. Please inquire.
UL listed and patented system.
TECHNICAL SPECIFICATIONS
SIZE 025: 14" wide X 34-3/4" long X 14" high
SIZE 050: 22" wide X 39" long X 14" high
SIZE 088: 22" wide X 39" long X 14" high
WEIGHT: Approximately 80 -195 lbs.
CAPACITY: Nominal 1/4 Ton, 1/2 Ton, & 1 Ton
CONSTRUCTION: All aluminum construction
REFRIGERANT: R-134a
ACCESS: All panels removable for maintenance and duct connections
INSTALLATION: Unit suspended by four 3/8" thread rods (customer supplied) or placed on a platform near the wine cellar
CONDENSATION: 1/2" Condensate Drain
ELECTRICAL: 110v 15 amp powercord on 1/4 &1/2 ton unit, 220v 10 amp power cord on 1 ton units
AGENCY APPROVAL: Unit approved by ETL according to UL1995 and CSA 1995
CONDENSER: Integral Air cooled condenser standard
THERMOSTAT: Digital thermostat supplied with each unit
| Model |
Circuit Amps
Voltage |
Tonnage/CFM |
Cooling Area
BTU's |
Price |
Shipping |
| CM-25 |
9 Amps
115 Volts |
1/4 ton / 207 |
up to 800 cu. ft.
3800 BTU's |
Reg $3989
Our Price $3289
|
$225 |
| CM-050 |
12 Amps
115 Volts |
1/2 ton / 375 |
800-1500 cu. ft.
6,000 BTU's |
Reg $4589
Our Price $3989
|
$235 |
| CM-088 |
9 Amps
220 Volts |
1 ton / 550 |
1600-3000 cu. ft.
9,000 BTU's |
Reg$4989
Our Price $4489
|
$255 |
There are 3 different ways to install this system. (please click on each link to view each setup)
Options available with this system include:
1. Drip Pad Humidifier with Humidistat $1275
2. Accessory Kit (2 collars + 25 ft. flex duct) $219
3. 10" diameter Duct Collar $79
4. 25 Feet 10" Flex Duct with 12 tie straps $79
5. ASHRAE Prefilter & Frame $149
6 Water Cooled Upgrade Option $460
7 On/Off Heater for either 110V or 210V $645
Warranty: 1 year parts, 1 year labor (NC)
Extended 5 year warranty on compressor avail. $220
For a better technical overview click below (must have adobe acrobat plugin to view)
CM AIR HANDLER SYSTEMS (click here)
FOR MORE INFO, PLEASE CALL US DIRECTLY (831)722-2333
